CNC Lathes Manufacturer - TMT
Home > Products > Machining Center > TBV Series (Boxway) > TBV-1572

TBV-1572  

TBV-1572
The Ultimate VMC's from TMT.
Now, you can step up your cutting operations for greater profit while reducing your operation costs. Select from the TMT line of ruggedly constructed VMC's.
Perfectly Designed to Optimize Cutting Efficiency
Oil Cooling Diagram
The oil cooling tubes are connected to the spindle motor adaptor and the spindle, which eliminate thermal displacement.
Spindle
The box type spindle stock is a rigid construction and scientifically rib reinforced.
The spindle runs on angular contact bearings to achieve optimal spindle rigidity and machining accuracy.
Minimum dynamic vibration is ±2μm.
Uniform lubrication points on slide ways. The machine employs a volume type lubricator for consistent oil flow to each point, assuring a uniform lubrication effect each slide lubrication point.
Lubrication System;
Well-designed lubrication system eliminated sticking problem on slide ways.
The oil grooves feature pressure relief to eliminate floating problem due to excessive oil pressure.
High Precision 3-dimensional Coordinate Measuring
All structural parts of the machine are precisely inspected by the sophisticated 3-dimensional coordinate measuring machine(CMM), that assure outstanding parts accuracy for assembling.
High-Tech Precision Inspection
Each machine is subject to high-tech precision inspections, such as laser unit and Renishaw ball bar tester, to guarantee the best possible repeatability and positioning accuracy.
Three Axes Box Ways
Ruggedly, Stable, Precision!
Outstanding Features Assure Heavy Accurate Machining on Every Job.The Ultimate VMC's from TMT.

 

2-speed Gear Type Spindle (TBV-1685/1885/2085)
Featuring high efficiency, high torque output and minimum noise..
Powerful Chip Flushing System
There are several flushing nozzles equipped at both sides of the machine guard. These nozzles provide efficient chip removing effect during cutting.
Tool Magazine(OPT)
Increased magazine loading capacity of 30, 40 tools is available.
Gear Type Spindle(OPT)
Gear type spindle can achieve 4,500/6,000 rpm and provide high torque to meet customer's needs for heavy cutting.
Direct Drive Spindle(OPT)
Direct coupled spindle offers less vibration than belt driven spindle, which drastically improves surface finish and machining accuracy.
Coolant through Spindle(OPT)
Coolant through spindle system can cool workpiece with fully effect to meet cutting needs for various materials.
Optical Scale(OPT)
The accuracy could be much improved with optical scale.
TBV-1572 Series
Standard Option
Spindle Speed 6000 rpm, Belt Drive Spindle Speed 8000 rpm, Belt Drive
FANUC 0i-MF Control Spindle Speed 10000/12,000 rpm, Direct Drive
SET-UP Guidance Spindle Speed 6000 rpm, Gear Drive
Auto Power OFF(M30) Two-Speed Gear Box
Rigid Tapping Coolant through Spindle(CTS)
Programs Memory 1280m Coolant through Tool
Memory Card Interface(PCMCIA) Spindle Coolant Ring
Ethernet Spindle Air Purge Curtain
USB Interface 3-axis Optical Linear Scale
3-color Warning Lamp "4th-axis Interface/4.5-axis Interface
(Tilting Rotary Table)"
Working Lamp 4th-axis Rotary Table
Arm Type Magazine 24T Air Conditioner
Spindle Oil Chiller High Pressure Coolant Pump
Programmable Cutting Air Blast Chain Type Chip Conveyor & Cart
Heat Exchanger Scraper Type Chip Conveyor & Cart
Automatic Lubrication System "Automatic Tool Length Measurement
and Breakage Detection(ATLM)"
Chip Flushing Device Automatic Workpiece Measurement System
Coolant System 200mm Raiser Block for Column
Tool Box with Tools Oil Skimmer
Operation/Maintenance Manual Air Gun
  Coolant Gun
  Transformer/Stablizer

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Description UnitTBV-1572
  Controller   0i-MF
TABLE Table size mm (in.) 1550x700
T-slot (size × number × pitch) mm (in.) 18x5Tx130
Max. load capacity kgf 1500
STROKE X-axis stroke mm (in.) 1500
Y-axis stroke mm (in.) 720
Z-axis stroke mm (in.) 680
SPINDLE Distance from table surface to spindle nose mm (in.) 170-850
Distance from column cover to spindle center line mm (in.) 745
Spindle motor (cont/ 30min) KW (HP) 15/18.5(20.0/24.6)
Spindle speed rpm 6000
Spindle taper - BT-50
MOTOR Servo motor of X,Y,Z axis KW (HP) 4/4/4
Lub. Motor W 30
Coolant motor W 750
FEEDRATE Rapid feedrate (X/Y/Z) m/min (pm) 18/18/15( opt. 24/24/15)
Cutting feedrate mm/min (ipm) 10000
A.T.C Tool storage capacity pcs Arm type 24T
Max. tool dia. (with adjacent tool) mm (in.) Ø110
Max. tool dia. (without adjacent tool) mm (in.) Ø200
Max. tool weight kg (Lb) 15
Tool change time (Tool to tool) sec 3.5 (60HZ)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.