Home > Products > Machining Center > TBV Series (Boxway) > TBV-2085

TBV-2085

PRODUCTS SEARCH

CNC Lathe

Machining Center

Tapping Center

TBV-2085

Description
Accessories
Specifications

The Ultimate VMC's from TMT.
Now, you can step up your cutting operations for greater profit while reducing your operation costs. Select from the TMT line of ruggedly constructed VMC's. Perfectly Designed to Optimize Cutting Efficiency
Oil Cooling Diagram
The oil cooling tubes are connected to the spindle motor adaptor and the spindle, which eliminate thermal displacement.
Spindle
●	The box type spindle stock is a rigid construction and scientifically rib reinforced.
●	The spindle runs on angular contact bearings to achieve optimal spindle rigidity and machining accuracy.
●	Minimum dynamic vibration is ±2μm.
●	Uniform lubrication points on slide ways. The machine employs a volume type lubricator for consistent oil flow to each point, assuring a uniform lubrication effect each slide lubrication point.
Lubrication System;
●	Well-designed lubrication system eliminated sticking problem on slide ways.
●	The oil grooves feature pressure relief to eliminate floating problem due to excessive oil pressure.
High Precision 3-dimensional Coordinate Measuring
All structural parts of the machine are precisely inspected by the sophisticated 3-dimensional coordinate measuring machine(CMM), that assure outstanding parts accuracy for assembling.
High-Tech Precision Inspection
Each machine is subject to high-tech precision inspections, such as laser unit and Renishaw ball bar tester, to guarantee the best possible repeatability and positioning accuracy.
Three Axes Box Ways Ruggedly, Stable, Precision!
Outstanding Features Assure Heavy Accurate Machining on Every Job.The Ultimate VMC's from TMT.

2-speed Gear Type Spindle (TBV-1685/1885/2085)

Featuring high efficiency, high torque output and minimum noise..

Powerful Chip Flushing System

There are several flushing nozzles equipped at both sides of the machine guard. These nozzles provide efficient chip removing effect during cutting.

Tool Magazine(OPT)

Increased magazine loading capacity of 30, 40 tools is available.

Gear Type Spindle(OPT)

Gear type spindle can achieve 4,500/6,000 rpm and provide high torque to meet customer's needs for heavy cutting.

Direct Drive Spindle(OPT)

Direct coupled spindle offers less vibration than belt driven spindle, which drastically improves surface finish and machining accuracy.

Coolant through Spindle(OPT)

Coolant through spindle system can cool workpiece with fully effect to meet cutting needs for various materials.

Optical Scale(OPT)

The accuracy could be much improved with optical scale.

TBV-2085 Series
Standard	Option
Spindle Speed 6000 rpm, Gear Drive	Spindle Speed 4500 rpm, Gear Drive
FANUC 0i-M Control	Spindle Air Purge Curtain
SET-UP Guidance	Coolant through Spindle(CTS)
Auto Power OFF(M30)	Coolant through Tool
Rigid Tapping	Spindle Coolant Ring
Programs Memory 1280m	3-axis Optical Linear Scale
RS-232 Interface	4th-axis Interface/4.5-axis Interface (Tilting Rotary Table)
Memory Card Interface(PCMCIA)	4th-axis Rotary Table
Ethernet	Air Conditioner
USB Interface	High Pressure Coolant Pump
3-color Warning Lamp	Chain Type Chip Conveyor & Cart
Working Lamp	Scraper Type Chip Conveyor & Cart
Arm Type Magazine 24T	Screw Type Chip Conveyor & Cart
Spindle Oil Chiller	Automatic Tool Length Measurement and Breakage Detection(ATLM)
Programmable Cutting Air Blast	Automatic Workpiece Measurement System
Heat Exchanger	200mm Raiser Block for Column
Automatic Lubrication System	Oil Skimmer
Chip Flushing Device	Air Gun
Coolant System	Coolant Gun
Y-axis Dual Chip Auger Device	Transformer/Stablizer
Tool Box with Tools
Operation/Maintenance Manual

■ Standard and optional equipments listed as above are for reference only.
　The correct information is dependent on customer's order.

Description		Unit	TBV-2085
	Controller		0i-M
TABLE	Table size	mm (in.)	2100x800
	T-slot (size × number × pitch)	mm (in.)	22x6Tx125
	Max. load capacity	kgf	2400
STROKE	X-axis stroke	mm (in.)	2000
	Y-axis stroke	mm (in.)	850 (opt.1000)
	Z-axis stroke	mm (in.)	750
SPINDLE	Distance from table surface to spindle nose	mm (in.)	150-900
	Distance from column cover to spindle center line	mm (in.)	850
	Spindle motor (cont/ 30min)	KW (HP)	15/18.5(20.0/24.6)[opt. 18.5/22(24.6/29.5)]
	Spindle speed	rpm	6000 (opt. 4500)
	Spindle taper	-	BT-50 (Gear type)
MOTOR	Servo motor of X,Y,Z axis	KW (HP)	7/7/7
	Lub. Motor	W	30X2
	Coolant motor	W	750
FEEDRATE	Rapid feedrate (X/Y/Z)	m/min (pm)	15/15/12
FEEDRATE	Cutting feedrate	mm/min (ipm)	10000
A.T.C	Tool storage capacity	pcs	Arm type 24T
	Max. tool dia. (with adjacent tool)	mm (in.)	Ø110
	Max. tool dia. (without adjacent tool)	mm (in.)	Ø200
	Max. tool weight	kg (Lb)	15
	Tool change time (Tool to tool)	sec	3.5 (60HZ)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.