TTB-20A

PRODUCTS SEARCH

TTB-20A

Outstanding Performance of the New Era！
TTB-20 Series make a limited space can be used with more flexibility. Excellent cutting performances with its compact floor space satisfy customers' needs of heavy duty cutting.
SLANT BED CNC LATHE
●	The one piece cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
●	The 30ﾟ slant bed design has low center of gravity for easier swarf management and better ergonomic design. The TTB-20 series also offers optional rear type chip conveyor.
●	Servo motors are directly coupled to ballscrew with high pretension to minimize backlash and thermal distortion and improve machining accuracy.
●	The TTB-20 Series can achieve maximum 20 m/min for X axis and 25 m/min for Z axis. And the servo motors adopt absolute encoders for faster and more reliable positioning.
Head Stock
●	The spindle has labyrinths to prevent moisture and dust.
●	The spindle is supported by NN double-row bearings combined with thrust ball bearing.
●	The belt adopt V belt to enhance horsepower transmission.
Boxway Structure
The Boxway design satisfies your rigidity needs for heavy cutting and interrupted cutting.

Servo Turret
High speed servo driven turret changes tool position within 0.2 seconds with high precision and speed.
Direct Coupled Motor
Driect coupled ballscrewtransfres energy without waste.
βP/ αP Series Motor (TTB-20C Series)
To installβP/ αPseries motor,the large low-speed torque can be obtained which satisfy customers’ diverse needs of cutting.
BMT Power Turret (TTB-20M/MY Series)
The highly rigid BMT turret has large torque output and stronger tool locking mechanism to handle heavier cutting conditions while improving tool interference. The BMT turret is ideal for heavy turning and milling applications.

True Y-Axis (TTB-20MY Series)
The true linear Y-axis can make operation more easily. Compare to fake Y-axis, it can provide great straightness, and also ensure excellent positioning accuracy. To satisfy high precision cutting needs.
Load Monitor Function(OPT)
FANUC control system: Extra load monitor function to control tooling working to axial loading value, which can notice tool consumption in advance and reduce loss rate of production efficiently.
Manual/ Auto Tool Presetter(OPT)
The tool presetter shortens tool set up time and can easily measure tool wear to ensure machining accuracy.
Parts Catcher(OPT)
The parts catcher is a synchronized design for quick collection of finished product.
Product Conveyor(OPT)
The product conveyor is combined with the barfeeder, which allows the machine to perform fully automatic operations.
Rear Type Chip Conveyor(OPT)
The optional rear discharge chip conveyor reduces valuable shop floor space and allows you to centralize your chip removal system.

Upright Control Panel
The agronomical control panel can be swiveled 90ﾟ for easier operator access.
Front Discharge Coolant Tank (Side type chip conveyor)
Coolant tank can be removed in the front for simple access to clean and maintain.
Tool Cabinet
Tool cabinet under the control panel offers extra storage space for operator to use for storing tools.

TTB-20 Series
Standard	Option
FANUC 0i-TF controller	Collet Chuck
Hollow Hydraulic 3-jaw Chuck 8"/10"	Servo Turret V12 (TTB-20 Series)
Servo Turret V10 (TTB-20 Series)	Hydraulic Turret V10/V12 (TTB-20 Series)
BMT-55 Power Turret (TTB-20M/MY Series)	Programmable Tailstock (TTB-20L/LM/LMY Series)
Foot Switch Control for Chuck	Parts Catcher
Manual Tailstock (TTB-20L/LM/LMY Series)	Product Conveyor
Coolant System	Rear Type Chip Conveyor & Cart
Automatic Lubrication System	Auto Door
3-color Warning Lamp	Manual/Auto Tool Presetter
Working Lamp	Front Air Blast
Tool Box with Tools	Oil Mist Collector
Side Type Chip Conveyor & Chip Cart	Oil Skimmer
Operation/Maintenance Manual	High Pressure Cutting Coolant Motor
Heat Exchanger	Barfeeder Interface
Manual Guide 0i	Bar Feeder
Auto Power Off (M30)	Air Conditioner
Dynamic Graph Simulation	Transformer/ Voltage Stabilizer
Rigid Tapping
RS-232 Interface
Memory Card Interface(PCMCIA)
Ethernet
USB Interface

■ Standard and optional equipments listed as above are for reference only.
　The correct information is dependent on customer's order.

Description		Unit	TTB-20
	Headstock Type		A
	Controller	-	0i-Mate TD
CAPACITY	Swing over bed	mm	Ø560
	Swing over saddle	mm	Ø400
	Max. turning diameter	mm	Ø430
	Max. working length	mm	300
	Distance between centers	mm	400
	Bar capacity	mm	Ø52
	Chuck size	inch	8"
STROKE	X-axis stroke	mm	215+25
STROKE	Z-axis stroke	mm	350
FEEDRATE	Axial rapid feedrate	m/min	X:20, Z:25
FEEDRATE	Cutting feedrate(X/Z)	mm/min	10000
SPINDLE	Spindle speed	rpm	4200
	Spindle nose	-	A2-6
	Spindle bore diameter	mm	Ø66
TURRET	Turret type and storage capacity	-	Servo V10
	Square tool dimension	mm	25x25
	Boring tool dimension	mm	Ø40
MOTOR	Spindle motor output (cont./30 min.)	KW(HP)	11/15 (14.7/20)
MOTOR	Axial servo motor output	KW(HP)	X:1.8, Z:1.8 (X:2.4, Z:2.4)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.