Home > Products > CNC Lathe > TTL-G Series > TTL-12G

TTL-12G  

TTL-12G
TTL-G Series
Standard Option
FANUC 0i-Mate TD controller Hollow Hydraulic 3-jaw Chuck 5"(TTL-10G)/6"(TTL-12G)
Collet Chuck 171E(TTL-10G)/173E(TTL-12G) Collet Chuck CL-36(TTL-10)/CL-42(TTL-12)
Hollow Hydraulic 3-jaw Chuck 5"(TTL-10)/6"(TTL-12) Foot Switch Control for Chuck (TL-10G/TL-12G)
Foot Switch Control for Chuck (TTL-10/12) Parts Catcher (TTL-10/12)
Parts Catcher (TTL-10G/12G) Product Conveyor (TTL-10/12)
Product Conveyor (TTL-10G/12G) Chain type Chip Conveyor & Chip Cart
Coolant System Screw type Chip Conveyor & Chip Cart
Automatic Lubrication System Auto Door
3-color Warning Lamp Oil Mist Collector
Working Lamp High Pressure Cutting Coolant Motor
Front Air Blast Bar Feeder
Tool Box with Tools Oil Skimmer
Chip Basket Manual/Auto Tool Presetter
Operation/Maintenance Manual Air Conditioner
Heat Exchanger Transformer/ Voltage Stabilizer
Manual Guide 0i  
Auto Power Off (M30)  
Barfeeder Interface  
Dynamic Graph Simulation  
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
   

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Description UnitTTL-12G
  Controller - 0i-Mate TD
CAPACITY Swing over bed mm φ475
Swing over saddle mm φ80
Max. turning diameter mm φ100
Max. working length mm 225
Bar capacity mm φ42
Chuck size inch -
Type of collet chuck - 173E
STROKE X-axis stroke mm 340
Z-axis stroke mm 265
FEEDRATE Axial rapid feedrate m/min X:18, Z:18 (opt. 24)
Cutting feedrate(X/Z) mm/min 10000
SPINDLE Spindle speed rpm 6000
Spindle nose - A2-5
Spindle bore diameter mm φ56
TURRET Turret type and storage capacity - -
Square tool dimension mm 20x20 (Gang type)
Boring tool dimension mm φ25 (Gang type)
MOTOR Spindle motor output (cont./30 min.) KW(HP) 3.7/5.5 (5/7.4)
Axial servo motor KW X:1.2, Z:1.2
(X:1.6, Z:1.6)