|
Highly Rigid Machine Structure Accuracy 5µm
|
|
■
Box ways on both axes. The slide ways are precision
machined, heat treated, precision grinding and scraped. Accuracy on both axes
are controlled in 5µm
|
|
|
■
The base is a rigid box type construction. It features
vibration free during high speed, high accuracy cutting, low speed heavy cutting
and thread cutting.
|
|
High Speed, High Precision Spindle
|
|
|
■
The spindle runs in class P4 high precision angular contact
ball bearings. The spindle is three points supported by bearings to increase spindle
rigidity while minimizing thermal deformation problem.
■
The specially designed spindle construction is not only
suitable for high speed, high precision cutting, but also excellent for heavy
duty cutting.
|
|
|
Cutting Fluid Cooling System
|
|
|
■
The cutting fluid flows through several mechanisms of the
machine, and is cooled down that effectively reduce temperature of the
machine and cutting fluid.
|
|
|
High Precision Servo Turret
|
|
|
■
The servo turret driven by a high speed servomotor. It’s
combined with high precision gear transmission to perform fast tool change.
■
Employs high precision speed reduction mechanism for
quiet tool change.
■
Adjacent tool change can be accomplished in only about
0.1 to 0.2 seconds.
|
|
|
Precision I.D. and O.D. Tool Holder
|
|
|
■
The highly right O.D. tool holders thoroughly eliminate
tool vibration problems during cutting.
■
The I.D. tool holders are bored on the machine and
run-out to the spindle center is controlled in 5µm.
■
Deviations of drilling and I.D. machining are kept at a
minimum.
|
|
|
Product Conveyor Parts Catcher
|
|
|
■
The parts catcher is designed by using the mechanical
synchronization principle. Once parts are finished and cut off, the parts
catcher collects the finished products fast and efficiently.
|
|
|
|
|
|
■
By equipping with bar feeder and product conveyor, the
CNC lathe provides a fully automatic operation system.
|
|
TL-42
