CNC Lathes Manufacturer - TMT
Home > Products > Tapping Center > BT-30 Series > TPV-603

TPV-603  

TPV-603
Optimal Structural Design!Maximum Stability!Maximum Rigidity!
The CNC tapping center, designed and manufactured by TMT, is your best choice in drilling and tapping work. The machine series employs a high speed traverse on three axes to significantly increase drilling and tapping efficiency. In addition, customers may select armless or arm type magazine according to machining requirement. The entire machine is ruggedly constructed to assure the highest machining accuracy.
The structural parts of the machine are manufactured from high quality MEEHANITE cast iron, rib reinforced and stress released to assure it remains deformation-free year after year.
Three axes slideways are mounted with precision linear ways. Extra-large span between ways. High feed rate and superior stability.
Servo motor directly drives ballscrew, featuring high positioning accuracy without backlash problem.
BT-30 Direct Drive Spindle
Spindle speed 10000, 12000, 15000, 20000, 24000 rpm
NBT with Two-Faces-Contact
Z axis Telescopic Guard
To conform high speed traverse of Z axis, it provides superior protection for linear ways and extends their service life.
Linear Ways on 3 Axes
The X, Y, Z axis slidways are mounted with precision linear ways, fitted with great span between ways, showing maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy.
Large Capacity Coolant Tank with Casters
Sliding coolant tank can be pulled out easily while coolant pump with mesh filter take away cutting chips quickly.
Chip Auger
A chip auger is mounted at the center of the base, removing chips to the rear side of the machine easily. It makes chip disposal convenient.
X, Y Axis Telescopic Guard
The telescopic guards on X, Y-axis prevent chips or coolant from damaging linear ways.
“V” shaped telescopic guard on X, Y axis allows fast chip removal and high efficiency linear way protection.
TPV-603/603A
Standard Option
Spindle air blow device 14T magazine (TPV-603)
Work light (PL Light) 21T magazine (servo ATC) T-T 1.6 sec. (TPV-603)
Coolant system and coolant tank Magaine with servo (TPV-603)
Leveling bolts and pads SK-30, CAT-30 Magazine & Spindle
Chip auger Hight Speed Spindle Upgrade To 12K/15K/20K/24K
Automatic lubrication system Spindle Power Upgrade to 5.5/3.7 kw
Tool kit and tools Extra Low Lnertia Spindle Motor (Rigid Tapping 6000rpm)
Dual-color LED alarm light Coolant through Spindle
Double-cabinet-type electrical cabinet ATLM with Breakage Detection
TFT LCD monitor Automatic Door
Spindle oil chiller (Spindle speed over 12,000 rpm) Transformer/Voltage Stabilizer
  Workpiece Air Blow System
  Oil Mist System
  Oil mist coolant system
  4th or 5th Axis
  Coolant Gun
  Thermal compensation system
  Enclosure Chip Flushing System
  Scraper or Chain type Chip Conveyor
  Mist Collector/Top Full Cover
  Air conditioner

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

MODEL
 
Unit
TPV-603
TPV-603A
TRAVEL
X-Travel
mm
600
Y-Travel
mm
400
Z-Travel
mm
350
430
Table to Spindle Nose
mm
150~500
150~580
TABLE
Table Size
mm
700×420
Max. Load
kgs
250
T Slot
mm
14x100x4
SPINDLE
Spindle Speed
rpm
10000
Max. Tapping Speed
rpm
4000
Spindle Taper
-
7/24 NO:30
Transmission
-
Direct Type
FEEDRATE
Rapid Traverse(G00)
m/min
48/48/60
Cutting Feedrate(G01)
mm/min
10000
MAGAZINE
Tool Shank
-
BT-30
Magazine Type
-
Armless
Arm
Tool Capacity
-
12
20+1
Max. Tool Length
mm
200
Max. Tool Diameter
mm
100
63
Tool Weight
kgs
2.5
3
Tool Change Time
Tool to tool
sec
1.4
1.5
Chip to chip
sec
2.1
1.9
MOTOR
X-Axis Servo Motor(MELDAS/FANUC)
KW
1.5/1.2
Y-Axis Servo Motor(MELDAS/FANUC)
KW
1.5/1.2
Z-Axis Servo Motor(MELDAS/FANUC)
KW
3.0/3.0
Spindle Motor
KW
3.7/2.2

■ All specifications, dimensions and design characteristics are subject to change without prior notice.