CNC Lathes Manufacturer - TMT
Home > Products > Tapping Center > BT-40 Series > TPV-320 5AX

TPV-320 5AX  

TPV-320 5AX
TPV-320 5AX
Optimal Design!!High Speed Without Vibration!!
Your best choice in machining complex and multi-face of parts.
The accuracy of the high-performance 5-axis machining center. It could reach the request of drilling, tapping, tilt face cutting and irregular surface machining of complex parts.
3-axis slideways are equipped with roller type linear guide ways.
Traveling column, oversized base and lightweight moving parts permit high-speed travel without vibration.
Raise up the height of basement to make the distance from spindle to blocks shorten, to ensure more rigidity on cutting.
Scales types of X-axis telescopic covers, divide cutting and non-cutting area, extend the lifetime of transmission system parts.
Machine Features
Standard spindle speed 8000 rpm (BT-40)
Rapid traverse 48/48/48 m/min (X/Y/Z)
Servo drive ATC (T to T) 1.7 Sec.
Rigid tapping 3000 rpm
Spindle type BT-40 direct-drive
Double support ATC base.
A axis +120∘/-30∘
C axis working table size φ320mm
Efficient Magazine
Standard capacity of the magazine is 30 tools. For BT-40 tool shank (T-T 1.7 sec.)
Servo Drive magazine provides quickly accomplished with smooth tool change motion.
Standard Fully-Sealed Electric Cabinet
In compliance with CE standards, the electric cabinet is equipped with rubber fitting around the opening such design ensures consistent condition within the electric cabinet to extend the lifetime of the electrical components.
Precise, Fast Rotary Table
High rigidity body.
Drum brake system, rotating center does not offset during braking. Minimum positioning error.
Large hole diameter allows for mounting multi-port oil distributor.
Transmitted by a specially designed dual lead worm with larger tooth depth and module, the rotary table is excellent for heavy cutting applications.
The worm is completely immersed in lubrication fluid for through lubrication and increased service life.
Integrated radial and axial bearing.
Waterproof design.
TPV-320 5AX
Standard Option
Spindle air blow device High Speed Spindle Upgrade To 10K/12K/15K
Screw type Chip Conveyor Spindle Power Upgrade to 11/15 kw
Work light (PL Light) HSK-63, SK-40, CAT-40 Magazine & Spindle
Tool Coolant System and High Flow Chip Flushing System Extra Low Lnertia Spindle Motor (Mitsubishi)
Pressure Detected Automatic Lubrication System and High Efficiency Lubrication Oil Filter Coolant through Spindle
Dual-color LED alarm light HSK-A63 Magazine & Spindle
One piece Dual Layer Insulated Electric Cabinet Three Axes Scale
Tool kit and tools A/C Axes Scale
Spindle oil chiller (Spindle speed 10K/12K/15K) Chip Conveyor Rear Type (Filiter/Chain type)
Hydraulic Unit Coolant Gun
Chip Conveyor-Scraper Type (Rear) Workpiece Air Blow System
  Oil mist coolant system
  Automatic Door
  Oil Skimmer
  Mist Collector/Top Full Cover
  Transformer/Voltage Stabilizer
  Air conditioner for Electrical Cabinet

■ Standard and optional equipments listed as above are for reference only.
The correct information is dependent on customer's order.

MODEL UnitTPV-320 5AX
TRAVEL
X-Axis
mm
560
Y-Axis
mm
400
Z-Axis
mm
400
A-Axis
DEG
+120º/-30º
C-axis
 
360º
Max. Swing
mm
φ320
Table to Spindle Nose
mm
150~550
Spindle Nose to Tilting center AT 90∘
mm
150~550
Max. Work area(90∘)
mm
φ260*260L
TABLE
Table Size
mm
φ320
Max. Load
kgs
100
T Slot
mm
12
SPINDLE
Spindle Speed
rpm
8000
Max. Tapping Speed
rpm
3000
Spindle Taper
-
7/24 NO:40
Transmission
-
Direct Drive
FEEDRATE
Rapid Traverse(G00)
m/min
48/48/48
Rapid C/A axis
rpm
25/16.6
Cutting Feedrate(G01)
mm/min
8000
MAGAZINE
Tool Shank
-
BT-40
Pull Studs
 
P40T-1 MAS403-45º
Magazine Type
-
Arm Type
Tool Capacity
-
30+1
Max. Tool Length
mm
275
Max. Tool Diameter
mm
80
Tool Weight
kgs
5
Tool Change Time
Tool to tool
sec
1.7
Chip to chip
sec
3.2
MOTOR
X-Axis Servo Motor(Mitsubishi/FANUC)
KW
7.5/5.5
Y-Axis Servo Motor(Mitsubishi/FANUC)
KW
1.5/1.8
Z-Axis Servo Motor(Mitsubishi/FANUC)
KW
1.5/1.8
Spindle Motor(Mitsubishi/FANUC)
KW
3.0/3.0

■ All specifications, dimensions and design characteristics are subject to change without prior notice.