CNC Lathes Manufacturer - TMT
Home > Products > Tapping Center > BT-40 Series > TPV-510II

TPV-510II  

TPV-510II
TPV-510II
OPTIMAL STRUCTURE DESIGN!GUARANTEED RIGIDITY AND STABILIT
The compact CNC machining center, designed and manufactured by TMT, is your best choice in complex work. New generation with high performance and optimal structural design, significant increase drilling and tapping efficiency.
MEEHANITE high quality casting iron assures permanent rigidity and accuracy.
The three axes slideways are mounted with precision linear ways thar ensure high smoothness of traveling. Suitable for high speed machining demand.
This series equipped with high speed traverse on the three axes to significantly increase drilling and tapping efficiency.
Servo motor directly drives ballscrew, featuring high positioning accuracy without backlash problem.
DIRECT DRIVE SPINDLE
Direct drive spindle, without noise, vibration and backlash.
COLUMN BASE INCREASED
With bagger span offer higher rigidity and cutting stability.
Y AXIS COVER GUARD
Full enclosure design of Y axis to avoid the chips accumulation.
LINEAR WAYS ON 3 AXES
The X, Y, Z axis slideways are mounted with precision linear ways, fitted with great span between ways, showing maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy.
HIGH EFFICIENCY CHIP FLUSHING SYSTEM AND EXTRA WIDE SPAN
Back-flow base design of chip removal angle provides ultimate chip removing capabilities.
With extra wide span, superior stability.
MOTOR OF Y AXIS
Y axis motor is mounted in front of machine to reduce the length of Y axis ballscrew, and heat difference.
ENCLOSED OF CABLE AND PIPES
All cables are fitted under cover will be affected in cutting area.
TPV-510II Series
Standard Option
Spindle air blow device Magazine with Servo Indexing (TPV-510E)
Magazine with Servo Indexing (TPV-510D) Coolant through spindle (TPV-510D/510A)
Work light (PL Light) High speed spindle Upgrade to 10K/12K, 15K(TPV-510D/510A)
Coolant system and coolant tank Spindle Power Upgrade 7.5/5.5 kw (TPV-510E), 11/7.5 kw (TPV-510D/510A)
Leveling bolts and pads SK-40 Magazine & Spindle
Double-cabinet-type electrical cabinet (with heat exchanger) HSK-63 Magazine & Spindle (TPV-510A)
Chip auger Extra Low Lnertia Spindle Motor (Mitsubishi/Rigid Tapping 4000rpm)
Automatic lubrication system ATLM with Breakage Detection
Tool kit and tools Automatic Door
Dual-color LED alarm light Transformer/Voltage Stabilizer
TFT LCD monitor Workpiece Air Blow System
Spindle oil chiller (Spindle speed over 10,000 rpm) Oil Mist System
Enclosure Chip Flushing System (TPV-510A) 4th or 5th Axis
  Thermal compensation system
  Scraper or Chain type Chip Conveyor
  Mist Collector
  Enclosure Chip Flushing System (TPV-510E/510D)

■ Standard and optional equipments listed as above are for reference only.
The correct information is dependent on customer's order.

MODEL
 
Unit
TPV-510D II
TPV-510A II
TRAVEL
X-Travel
mm
510
510
Y-Travel
mm
420
420
Z-Travel
mm
400
630
Table to Spindle Nose
mm
150~550
150~680
TABLE
Table Size
mm
600×450
Max. Load
kgs
250
T Slot
mm
14x100x4
SPINDLE
Spindle Speed
rpm
8000
Max. Tapping Speed
rpm
3000
Spindle Taper
-
7/24 BT-40
Transmission
-
Direct Type
FEEDRATE
Rapid Traverse(G00)
m/min
48/48/48
Cutting Feedrate(G01)
mm/min
10000
MAGAZINE
Tool Shank
-
BT-40
Pull Studs
-
P40T-1 MAS403-45"
Tool Capacity
-
14
24+1
Max. Tool Length
mm
300
300
Max. Tool Diameter
mm
100
80
Tool Weight
kgs
3
4
Tool Change Time
Tool to tool
sec
1.8
1.7
Chip to chip
sec
2.4
2.4
Magazine Type
-
Armless
Arm
MOTOR
X-Axis Servo Motor(Mitsubishi/FANUC)
KW
1.5/1.2
Y-Axis Servo Motor(Mitsubishi/FANUC)
KW
1.5/1.2
Z-Axis Servo Motor(Mitsubishi/FANUC)
KW
3.0/2.5
Spindle Motor
KW
7.5/5.5

■ All specifications, dimensions and design characteristics are subject to change without prior notice