Home > Products > CNC Lathe > TTL Series > TTL-20ALM

TTL-20ALM  

TTL-20ALM
TTL-20ALM
TTL Series
Standard Option
FANUC 0i-Mate TD/TD controller Collet Chuck
Hollow Hydraulic 3-jaw Chuck 6"/8"/10" Hydraulic Turret V12 (TTL Series)
Hydraulic Turret V10 (TTL Series) Servo Turret V10/V12 (TTL Series)
BMT-55 Power Turret (TTL-M/MY Series) Programmable Tailstock  (TTL-L/LM/LMY Series)
Foot Switch Control for Chuck Parts Catcher
Manual Tailstock  (TTL-L/LM/LMY Series) Product Conveyor
Coolant System Rear Type Chip Conveyor & Cart
Automatic Lubrication System Auto Door
3-color Warning Lamp Manual/Auto Tool Presetter
Working Lamp Front Air Blast
Tool Box with Tools Oil Mist Collector
Chip Conveyor & Chip Cart Oil Skimmer
Operation/Maintenance Manual High Pressure Cutting Coolant Motor
Heat Exchanger Barfeeder Interface
Manual Guide 0i Bar Feeder
Auto Power Off (M30) Air Conditioner
Dynamic Graph Simulation Transformer/ Voltage Stabilizer
Rigid Tapping  
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
USB Interface  

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Description UnitTTL-20 Series
  Headstock Type   ALM
Controller - 0i-TD
CAPACITY Swing over bed mm (in.) φ560
Swing over saddle mm (in.) φ365
Max. turning diameter mm (in.) φ380
Max. working length mm (in.) 470
Distance between centers mm (in.) 650
Bar capacity mm (in.) φ52
Chuck size inch 8"
STROKE X-axis stroke mm (in.) 190+30
Z-axis stroke mm (in.) 600
FEEDRATE Axial rapid feedrate m/min (ipm) X:30, Z:30
Cutting feedrate (X/Z) mm/min (ipm) 10000
SPINDLE Spindle speed rpm 4200
Spindle nose - A2-6
Spindle bore diameter mm (in.) φ66
TURRET Turret type and storage capacity - BMT-55/V12
Square tool dimension mm (in.) 25x25
Boring tool dimension mm (in.) φ40
M-axis tool speed rpm 4000
M-axis tool motor output (cont/15 min) KW(HP) 2.2/3.7(3/5)
MOTOR Spindle motor output (cont./30 min.) KW(HP) 7.5/11(10/14.7)
Axial servo motor output KW(HP) X:3.0, Z:3.0
(X:4.0, Z:4.0)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.