CNC Lathes Manufacturer - TMT
Home > Products > CNC Lathe > TTL Series > TTL-20B

TTL-20B  

TTL-20B
TTL-20B
Extreme Turning for the New Era!  
TTL-Series offers high productivity and high accuracy performance through exceptional cutting capability and parts finish. The TTL-Series is your best choice for ultra-performance turning center. With Y axis function, TTL-Series can reach your needs for higher level and various cutting.
High Efficiency / High Accuracy
The one piece cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
The 30゚ slant bed design has low center of gravity for easier swarf management and better ergonomic design.  The TTL-series also offers optional rear discharge chip conveyor.
Servo motors are directly coupled to ballscrew with high pretension to minimize backlash and thermal distortion and improve machining accuracy.
TTL-Series incorporates high quality linear guide system offering better accuracy, higher speed and lower friction than boxed way.  The TTL-Series can achieve maximum 30m/min axial rapid feed in both X and Z axis.
Head Stock  ttl
The spindle has labyrinths to prevents moisture and dust.
The spindle is supported by NN double-row bearings combined with thrust ball bearing.
Hydraulic Turret (STD)/ Servo Turret (OPT) ttl
Low noise and high torque DANFOSS hydraulic system is used to enhance the turret clamping force as well as station change time.
High speed servo driven turret changes tool position within 0.3 seconds with high precision and speed.

 

Direct Drive Spindle  ttl
Direct coupled ballscrew transfers energy without waste.
BMT Power Turret (TTL-20M/MY Series)  ttl
The highly rigid BMT turret has large torque output and stronger tool locking mechanism to handle heavier cutting conditions while improving tool interference. The BMT turret is ideal for heavy turning and milling applications.
True Y-Axis (TTL-20MY Series)  ttl
The true linear Y-axis can make operation more easily. Compare to fake Y-axis, it can provide great straightness, and also ensure excellent positioning accuracy. To satisfy high precision cutting needs.
Manual Tailstock  ttl
Highly rigid tailstock structure and hydraulic tailstock center reduces cutting vibration.  The tailstock can be easily positioned through manual connection with turret. 

 

Manual/ Auto Tool Presetter(OPT) ttl
The tool presetter shortens tool set up time and can easily measure tool wear to ensure machining accuracy.
Load Monitor Function(OPT) ttl
FANUC control system: Extra load monitor function to control tooling working to axial loading value, which can notice tool consumption in advance and reduce loss rate of production efficiently.
Rear Type Chip Conveyor(OPT) ttl
The optional rear discharge chip conveyor reduces valuable shop floor space and allows you to centralize your chip removal system.
Ergonomically Designed Coolant  
Ergonomically designed for easy machine set up and parts loading and unloading.

 

Upright Control Panel ttl
The agronomical control panel can be swiveled 90˚ for easier operator access.
Front Discharge Coolant Tank ttl
Coolant tank can be removed in the front simple access to clean and maintain.
Tool Cabinet  
Tool cabinet under the control panel offers extra storage space for operator to use for storing tools.
TTL Series
Standard Option
FANUC 0i-Mate TD/TD controller Collet Chuck
Hollow Hydraulic 3-jaw Chuck 6"/8"/10" Hydraulic Turret V12 (TTL Series)
Hydraulic Turret V10 (TTL Series) Servo Turret V10/V12 (TTL Series)
BMT-55 Power Turret (TTL-M/MY Series) Programmable Tailstock  (TTL-L/LM/LMY Series)
Foot Switch Control for Chuck Parts Catcher
Manual Tailstock  (TTL-L/LM/LMY Series) Product Conveyor
Coolant System Rear Type Chip Conveyor & Cart
Automatic Lubrication System Auto Door
3-color Warning Lamp Manual/Auto Tool Presetter
Working Lamp Front Air Blast
Tool Box with Tools Oil Mist Collector
Chip Conveyor & Chip Cart Oil Skimmer
Operation/Maintenance Manual High Pressure Cutting Coolant Motor
Heat Exchanger Barfeeder Interface
Manual Guide 0i Bar Feeder
Auto Power Off (M30) Air Conditioner
Dynamic Graph Simulation Transformer/ Voltage Stabilizer
Rigid Tapping  
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
USB Interface  

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Description UnitTTL-20 Series
  Headstock Type   B
Controller - 0i-Mate TD
CAPACITY Swing over bed mm (in.) φ560
Swing over saddle mm (in.) φ365
Max. turning diameter mm (in.) φ400
Max. working length mm (in.) 270
Distance between centers mm (in.) 390
Bar capacity mm (in.) φ65
Chuck size inch 10"
STROKE X-axis stroke mm (in.) 205+25
Z-axis stroke mm (in.) 320
FEEDRATE Axial rapid feedrate m/min (ipm) X:30, Z:30
Cutting feedrate (X/Z) mm/min (ipm) 10000
SPINDLE Spindle speed rpm 3500
Spindle nose - A2-6
Spindle bore diameter mm (in.) φ79
TURRET Turret type and storage capacity - Hydraulic V10 (opt. V12)
Square tool dimension mm (in.) 25x25 ( opt. V12 20x20)
Boring tool dimension mm (in.) φ40 (opt. V12 φ32)
MOTOR Spindle motor output (cont./30 min.) KW(HP) 11/15(14.7/20)
Axis servo motor KW X:1.8, Z:1.8

■ All specifications, dimensions and design characteristics are subject to change without prior notice.