TTL-20BLM

PRODUCTS SEARCH

TTL-20BLM

PREV NEXT

Extreme Turning for the New Era!
TTL-Series offers high productivity and high accuracy performance through exceptional cutting capability and parts finish. The TTL-Series is your best choice for ultra-performance turning center. With Y axis function, TTL-Series can reach your needs for higher level and various cutting.
High Efficiency / High Accuracy
●	The one piece cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
●	The 30ﾟ slant bed design has low center of gravity for easier swarf management and better ergonomic design. The TTL-series also offers optional rear discharge chip conveyor.
●	Servo motors are directly coupled to ballscrew with high pretension to minimize backlash and thermal distortion and improve machining accuracy.
●	TTL-Series incorporates high quality linear guide system offering better accuracy, higher speed and lower friction than boxed way. The TTL-Series can achieve maximum 30m/min axial rapid feed in both X and Z axis.
Head Stock
The spindle has labyrinths to prevents moisture and dust. The spindle is supported by NN double-row bearings combined with thrust ball bearing.
Hydraulic Turret (STD)/ Servo Turret (OPT)
Low noise and high torque DANFOSS hydraulic system is used to enhance the turret clamping force as well as station change time. High speed servo driven turret changes tool position within 0.3 seconds with high precision and speed.

Direct Drive Spindle
Direct coupled ballscrew transfers energy without waste.
BMT Power Turret (TTL-20M/MY Series)
The highly rigid BMT turret has large torque output and stronger tool locking mechanism to handle heavier cutting conditions while improving tool interference. The BMT turret is ideal for heavy turning and milling applications.
True Y-Axis (TTL-20MY Series)
The true linear Y-axis can make operation more easily. Compare to fake Y-axis, it can provide great straightness, and also ensure excellent positioning accuracy. To satisfy high precision cutting needs.
Manual Tailstock
Highly rigid tailstock structure and hydraulic tailstock center reduces cutting vibration. The tailstock can be easily positioned through manual connection with turret.

Manual/ Auto Tool Presetter(OPT)
The tool presetter shortens tool set up time and can easily measure tool wear to ensure machining accuracy.
Load Monitor Function(OPT)
FANUC control system: Extra load monitor function to control tooling working to axial loading value, which can notice tool consumption in advance and reduce loss rate of production efficiently.
Rear Type Chip Conveyor(OPT)
The optional rear discharge chip conveyor reduces valuable shop floor space and allows you to centralize your chip removal system.
Ergonomically Designed Coolant
Ergonomically designed for easy machine set up and parts loading and unloading.

Upright Control Panel
The agronomical control panel can be swiveled 90˚ for easier operator access.
Front Discharge Coolant Tank
Coolant tank can be removed in the front simple access to clean and maintain.
Tool Cabinet
Tool cabinet under the control panel offers extra storage space for operator to use for storing tools.

TTL Series
Standard	Option
FANUC 0i-Mate TD/TD controller	Collet Chuck
Hollow Hydraulic 3-jaw Chuck 6"/8"/10"	Hydraulic Turret V12 (TTL Series)
Hydraulic Turret V10 (TTL Series)	Servo Turret V10/V12 (TTL Series)
BMT-55 Power Turret (TTL-M/MY Series)	Programmable Tailstock (TTL-L/LM/LMY Series)
Foot Switch Control for Chuck	Parts Catcher
Manual Tailstock (TTL-L/LM/LMY Series)	Product Conveyor
Coolant System	Rear Type Chip Conveyor & Cart
Automatic Lubrication System	Auto Door
3-color Warning Lamp	Manual/Auto Tool Presetter
Working Lamp	Front Air Blast
Tool Box with Tools	Oil Mist Collector
Chip Conveyor & Chip Cart	Oil Skimmer
Operation/Maintenance Manual	High Pressure Cutting Coolant Motor
Heat Exchanger	Barfeeder Interface
Manual Guide 0i	Bar Feeder
Auto Power Off (M30)	Air Conditioner
Dynamic Graph Simulation	Transformer/ Voltage Stabilizer
Rigid Tapping
RS-232 Interface
Memory Card Interface(PCMCIA)
Ethernet
USB Interface

■ Standard and optional equipments listed as above are for reference only.
　The correct information is dependent on customer's order.

Description		Unit	TTL-20 Series
	Headstock Type		BLM
	Controller	-	0i-TD
CAPACITY	Swing over bed	mm	φ560
	Swing over saddle	mm	φ365
	Max. turning diameter	mm	φ380
	Max. working length	mm	440
	Distance between centers	mm	640
	Bar capacity	mm	φ65
	Chuck size	inch	10"
STROKE	X-axis stroke	mm	190+30
STROKE	Z-axis stroke	mm	570(22.23)
FEEDRATE	Axial rapid feedrate	m/min	X:30, Z:30
FEEDRATE	Cutting feedrate (X/Z)	mm/min	10000
SPINDLE	Spindle speed	rpm	3500
	Spindle nose	-	A2-6
	Spindle bore diameter	mm	φ79
TURRET	Turret type and storage capacity	-	BMT-55/V12
	Square tool dimension	mm	25x25
	Boring tool dimension	mm	φ40
	M-axis tool speed	rpm	4000
	M-axis tool motor output (cont/15 min)	KW(HP)	2.2/3.7(3/5)
MOTOR	Spindle motor output (cont./30 min.)	KW(HP)	11/15 (14.7/20)
MOTOR	Axial servo motor output	KW(HP)	X:3.0, Z:3.0 (X:4.0, Z:4.0)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.