Products
Dependability through comprehensive manufacturing capabilities
TG Series TG-450 5AX
Model Number: TG-450 5AX
X Axis Travel：650 mm
Y Axis Travel：630 mm
Z Axis Travel：480 mm
Spindle Taper：BT-40
- Description
- Specifications
- Accessories
Meticulous Design is your best choice in precision finishing.
- High cutting rigidity with gantry type structure design.
- ATC installed at the center of basement to reduce the width of the machine to save the walking steps for loading & unloading workpiece.
- Without carrying ATC system on moving parts to make it lighter, make sure cutting without vibration.
- Cutting area isolation to ensure the transmission system life longer and easier to install optical scales.
- Y axis linear guide with chromate finish and anti-rusty treatment, with two pieces wipers to prevent chips to affect accuracy.
Direct-drive spindle
BT-40/HSK 50A/HSK 63A
- Direct drive transmission, no noise, vibration and backlash problems.
- Spindle air curtain, prevents moisture and chips going into the spindle.
- HSK tool holder with two faces contact thus high rigidity and precision when install high-speed spindle.
- HSK A63-20000 rpm built-in spindle with high efficiency chiller system and mist lubrication system to apply longer life, low heat and accuracy.
Servo Drive Magazine
Fast and stability (C-C 4 sec.). ATC install at the center of basement to reduce the width of the machine and save the walking steps to loading and unloading workpiece.
Powerful C-axis Rotary Table
- Good at multi-faces machining to save working hours on ATC time.
- Integrated radial bearing, with less part to reduce the relative cumulative difference.
- High positioning and repeatability accuracy.
High Loading Capacity Fix Table
- The working table can load up to 1000 kgs.
- Table size achieves 1700mm, good at machining long workpiece.
- Install rotary table without any wasting space almost full travel could be used.
Spindle speed upgrade
Standard with directly drive spindle.Optional spindle speed with 12,000/15,000 and built-in type 20,000 rpm spindle.
Coolant Through Spindle
Coolant through spindle system can cool workpiece with fully effect to meet cutting needs for various materials. ATLM w/Breakage Detection
Measure the tool length and diameter quickly, and make in-cycly tool breakage detection which can improve the efficiency of machine.Optical Scale
The machine accuracy could be much improved with optical scale.Rear Type Chip Conveyor
With rear type chip conveyor to improve the chip removal efficiency and convenience. Easy to clean and save the labor requirement.| MODEL | Unit | TG-450 5AX | ||
|---|---|---|---|---|
| TRAVEL | X-Axis | mm | 650 | |
| Y-Axis | mm | 630 | ||
| Z-Axis | mm | 480 | ||
| A-Axis | DEG | -110°/+30° | ||
| C-axis | DEG | 360° | ||
| Table to Spindle Nose | mm | 150-630 | ||
| Max. Work area | mm | Ø450x400 | ||
| TABLE | Table Size | mm | Ø350 | |
| Max. Load | kgs | 200(H)/150(T) | ||
| SPINDLE | Spindle Speed | rpm | 10000 | |
| Spindle Taper | - | BT-40 | ||
| Transmission | - | Direct Drive | ||
| FEEDRATE | Rapid Traverse(G00) | m/min | 48/48/48 | |
| Cutting Feedrate(G01) | mm/min | 10000 | ||
| MAGAZINE | Tool Shank | - | BT-40 | |
| Pull Studs | - | MAS403-BT40-45 | ||
| Magazine Type | - | Servo Drive | ||
| Tool Capacity | - | 40 | ||
| Max. Tool Length | mm | 300 | ||
| Max. Tool Diameter | mm | 76 | ||
| Tool Weight | kgs | 7 | ||
| Tool Change Time | Tool to tool | sec | 4 | |
| MOTOR | X-Axis Servo | KW | 3.0 | |
| Y-Axis Servo | KW | 3.0 | ||
| Z-Axis Servo | KW | 3.0 | ||
| Spindle Motor(Mitsubishi/FANUC) | KW | 7.5/11 | ||
| TG Series | |
|---|---|
| Standard | Option |
| Spindle Air Blow Device | Spindle Speed Upgrade 12,000/15,000/20,000 (Bulit-in type) rpm |
| Two-Side Chip Flushing System | HSK 50A tool magazine (30T) and spindle |
| Work Light (PL Light) | HSK 63A tool magazine (22T) and spindle |
| Electrical Cabinet | SK-40, CAT-40 tool magazine and spindle |
| Coolant System | NBT-40, BBT-40 spindle |
| Automatic Lubrication System | Working Table Lower 100mm (TG-1200) |
| Dual-Color LED Alarm Light | ATLM with Breakage Detection |
| Tool Kits and Tools | Optical Scale |
| TFT LCD Monitor | A / C Axis Optical Scale (TG-450 5AX) |
| Coolant Tank and Chip Basket | Rear type Chip Conveyor (Filter/Chain/Scraper type) |
| Spindle Oil Chiller(Spindle Speed 12000/15000/20000 rpm) | Auto Door |
| Hydraulic Unit (TG-450 5AX) | Coolant Gun |
| Spindle Oil/Air Mist Lubrication System (Built-in Spindle Standard, for other models optional) | Air Gun |
| 4th axis Rotary Table/5th Axis Rotary and Tilting Table | |
| Air Conditioner | |
| Trnasformer/Voltage Stabilizer | |