Products

Dependability through comprehensive manufacturing capabilities

TLV Series (Linear) TLV-850II APC

Model Number: TLV-850II APC

X Axis Travel:850 mm 
Y Axis Travel:500 mm
Z Axis Travel:580 mm
Spindle Taper:BT-40

  • Description
  • Specifications
  • Accessories

The Optimal in Vertical Machining Center

New Generation from TMT!


High Rigidity Structural design supports high speed and heavy duty cutting conditions required today.

To meet high production needs, the dual pallet APC system reduces non-machining time to greatly increase efficiency and utilization of the machine.


Column

Extra heavy duty column construction dramatically increases rigidity and stability.


High Rigidity Structural design supports high speed and heavy duty cutting conditions required today.

To meet high production needs, the dual pallet APC system reduces non-machining time to greatly increase efficiency and utilization of the machine.


Column

Extra heavy duty column construction dramatically increases rigidity and stability.


Magazine

The tool magazine is secured and supported to the base instead of the column to minimize column tilting and vibration caused magazine movements.


Table

Centralized auto lube system provides necessary lubrication to required areas to prolong machine life.


Basement

New design of wide basement, oversized span. The triangle shape construction increases machine rigidity and stability.
The sturdy column is reinforced with additional ribbing to evenly disperse and absorb resistance during machining without distortion.


Saddle

U-shaped ribbing drastically improve structural rigidity.
Wider and longer saddle structure compliments the heavy duty linear guide to enhance dynamics of the machine.


Spindle

10000 rpm Best cartridge type spindles with high speed bearings for extra rigidity and incredible surface finish & accuracy.


Oil Chiller

The spindle oil chiller provides consistent temperature control in order to maintain ultimate machine stability.


Linear Guide Way

*The linear guides on three axes are P4 grade, providing stability and heavy cutting.
*High efficiency machining center. Rapid traverse 36M/min

Description   Unit TLV-850II APC
  Controller   0i-M
TABLE Table size mm 850x500
T-slot (size × number × pitch) mm 18x5Tx100
Max. load capacity kgf 350x2
STROKE X-axis stroke mm 850
Y-axis stroke mm 500
Z-axis stroke mm 580
SPINDLE Distance from table surface to spindle nose mm 155-735
Distance from column cover to spindle center line mm 586
Spindle motor (cont/ 30min) KW(HP) 11/15(14.7/20.1)
Spindle speed rpm 10000
Spindle taper - BT-40
MOTOR Servo motor of X,Y,Z axis KW 1.8/1.8/3.0
Lub. Motor W) 24
Coolant motor W 750
FEEDRATE Rapid feedrate (X/Y/Z) m/min 36/36/30
Cutting feedrate mm/min 10000
A.T.C Tool storage capacity pcs Arm Type 24T
Max. tool dia. (with adjacent tool) mm Ø76
Max. tool dia. (without adjacent tool) mm Ø150
Max. tool weight kg 7
Tool change time (Tool to tool) sec 2.0

■ All specifications, dimensions and design characteristics are subject to change without prior notice.

TLV Series
Standard Option
FANUC 0i-M Control  
Spindle Speed 8000 rpm, Belt Drive
(TLV/TCV-966/1166)
Spindle Speed 10,000/12,000 rpm, Belt Drive
Spindle Speed 10,000 rpm, Belt Drive
(TLV-850/850s)
Spindle Speed 12,000/15,000 rpm, Direct Coupled
Carrousel Type Magazine 16T(TLV-850) Rapid Tool Changer
Arm Type Magazine 24T
(TLV-850s, TLV/TCV-966/1166)
Servo Drive and Spindle Motor
Adopts FANUC Alpha Type Series
Coolant through Ballscrew(TLV-850s) Coolant through Spindle(CTS)
Fully Enclosed Splash Guard Coolant through Tool
Spindle Chiller Coolant through ballscrew
Spindle Air Purge Curtain Coolant Ring
Programmable Cutting Air Blast 3-axis Optical Linear Scale
Chip Flushing Device 4th-axis Interface/4.5-axis Interface
(Tilting Rotary Table)
Coolant System 4th-axis Rotary Table
Automatic Lubrication System Chain Type Chip Conveyor & Chip Cart
Electrical Cabinet Heat Exchanger Scraper Type Chip Conveyor & Chip Cart
3-color Warning Lamp High Pressure Coolant Pump
Working Lamp High Precision Linear Roller Guides
Tool Box with Tools Automatic Tool Length Measurement
and Breakage Detection(ATLM)
Operation Manual Automatic Workpiece Measurement System
Maintenance Manual 200mm Raiser Block for Column
Manual Guide 0i Oil Skimmer
Auto Power OFF(M30) Air Gun
Rigid Tapping Coolant Gun
Macro Programs Memory 1280M Transformer
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
Rapid Tool Changer(TLV-850s)  

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Top