Products

Dependability through comprehensive manufacturing capabilities

TTL-G Series TTL-10G

Model Number: TTL-10G

Chuck size:171E
Bar capacity:Ø 33 mm
Max. working length:225mm
Max. turning diameter:Ø100 mm
Spindle Nose:A2-4

  • Description
  • Specifications
  • Accessories

Diverse Optional Devices for Enhanced Performance!

  • The one piece cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
  • The 45゚ slant bed design improve the ability for chip removal.
  • Servo motors are directly coupled to ballscrew with high pretension to minimize backlash and thermal distortion and improve machining accuracy.
  • The rapid federate of TTL-G Series is 18 m/min for X axis and 18 m/min for Z axis. And the servo motors adopt absolute encoders for faster and more reliable positioning.
ttl-g

Gang Type Tool Holder System(TTL-10G/15G)

The gang type tool holder can be arranged flexibly depend on cutting needs.
The maximum capacity is 5 inner-diameter cutting tools at the same time.

ttl-g

X/Z Axis Linear Guideway

X/Z axis adopt with linear guideway to satisfy high accuracy and rapid moving requirement.

ttl-g

Servo Turret (TTL-10S/15S)

High speed servo driven turret changes tool position within 0.3 seconds with high precision and speed.

ttl-g

Parts Catcher (TTL-10G/15G)

The parts catcher is a synchronized design for quick collection of finished product.

ttl-g

Product Conveyor(TTL-10G/15G)

The product conveyor combined with the barfeeder allows the machine to perform fully automatic operations.

ttl-g

Separated Independent Coolant Tank

The independent coolant tank can be cleaned easily and improve the convenience for daily maintenance.

ttl-g

Chip Basket

Standard with the chip basket to easier the daily clearance. Also can reduce valuable shop floor space and increase the space utilization.

ttl-g

Load Monitor Function(OPT)

FANUC control system: Extra load monitor function to control tooling working to axial loading value, which can notice tool consumption in advance and reduce loss rate of production efficiently.

ttl-g

C-Axis Function(OPT)

Optional C-axis function allows the operation for milling, drilling and tapping.

ttl-g

Rear Type Chip Conveyor(OPT)

Besides chain type chip conveyor, we also offer optional screw type chip conveyor which ca satisfy different type chips for various material.

ttl-g

Barfeeder(OPT)

Automatic feeding system can replace traditional artificial operating, substantial saving labor requirement.

ttl-g

Oil Mist Collector(OPT)

Adopt 2-step filter, efficiency saving fuel consumption; avoid oil mist spread to working environment.

Multiple Tools Collocation (OPT)

Multiple tools collocation offers flexibility to meet customer's requirement for various application.

ttl-g   ttl-g   ttl-g   ttl-g
Description   Unit TTL-10G
  Controller - 0i-T
CAPACITY Swing over bed mm φ475
Swing over saddle mm φ80
Max. turning diameter mm φ100
Max. working length mm 225
Bar capacity mm φ36
Chuck size inch -
Type of collet chuck - 171E
STROKE X-axis stroke mm 340
Z-axis stroke mm 265
FEEDRATE Axial rapid feedrate m/min X:18, Z:18 (opt. 24)
Cutting feedrate(X/Z) mm/min 10000
SPINDLE Spindle speed rpm 6000
Spindle nose - A2-4
Spindle bore diameter mm φ45
TURRET Turret type and storage capacity - -
Square tool dimension mm 20x20 (Gang type)
Boring tool dimension mm φ25 (Gang type)
MOTOR Spindle motor output (cont./30 min.) KW(HP) 5.5/7.5 (7.3/10)
Axial servo motor KW X:1.2, Z:1.2
(X:1.6, Z:1.6)

 

TTL-G Series
Standard Option
FANUC 0i-T controller Hollow Hydraulic 3-jaw Chuck 5"(TTL-10G)/6"(TTL-15G)
Collet Chuck 171E(TTL-10G)/173E(TTL-15G) Collet Chuck CL-36(TTL-10S)/CL-42(TTL-15S)
Hollow Hydraulic 3-jaw Chuck 5"(TTL-10S)/6"(TTL-15S) Foot Switch Control for Chuck (TTL-10G/15G)
Foot Switch Control for Chuck (TTL-10S/15S) Parts Catcher (TTL-10S/15S)
Parts Catcher (TTL-10G/15G) Product Conveyor (TTL-10S/15S)
Product Conveyor (TTL-10G/15G) Chain type Chip Conveyor & Chip Cart
Coolant System Screw type Chip Conveyor & Chip Cart
Automatic Lubrication System Auto Door
3-color Warning Lamp Oil Mist Collector
Working Lamp High Pressure Cutting Coolant Motor
Front Air Blast Bar Feeder
Tool Box with Tools Oil Skimmer
Chip Basket Manual/Auto Tool Presetter
Operation/Maintenance Manual Air Conditioner
Heat Exchanger Transformer/ Voltage Stabilizer
Manual Guide 0i  
Auto Power Off (M30)  
Barfeeder Interface  
Dynamic Graph Simulation  
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
   

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Top