Продукты

Dependability through comprehensive manufacturing capabilities

BT-40 Серия TPV-600II

Model Number: TPV-600II

По оси X :600 mm
По оси Y :420 mm
По оси Z :400/530 mm
Конус шпинделя:BT-40

  • Описание продукции
  • Технические характеристики
  • Характер продукта

OPTIMAL STRUCTURE DESIGN!GUARANTEED RIGIDITY AND STABILIT!

The compact CNC machining center, designed and manufactured by TMT, is your best choice in complex work. New generation with high performance and optimal structural design, significant increase drilling and tapping efficiency.

  • MEEHANITE high quality casting iron assures permanent rigidity and accuracy.
  • The three axes slideways are mounted with precision linear ways thar ensure high smoothness of traveling. Suitable for high speed machining demand.
  • This series equipped with high speed traverse on the three axes to significantly increase drilling and tapping efficiency.
  • Servo motor directly drives ballscrew, featuring high positioning accuracy without backlash problem.

DIRECT DRIVE SPINDLE

Direct drive spindle, without noise, vibration and backlash.


COLUMN BASE INCREASED

With bagger span offer higher rigidity and cutting stability.


Y AXIS COVER GUARD

Full enclosure design of Y axis to avoid the chips accumulation.


LINEAR WAYS ON 3 AXES

The X, Y, Z axis slideways are mounted with precision linear ways, fitted with great span between ways, showing maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy.


HIGH EFFICIENCY CHIP FLUSHING SYSTEM AND EXTRA WIDE SPAN

  • Back-flow base design of chip removal angle provides ultimate chip removing capabilities.
  • With extra wide span, superior stability.

MOTOR OF Y AXIS

Y axis motor is mounted in front of machine to reduce the length of Y axis ballscrew, and heat difference.


ENCLOSED OF CABLE AND PIPES

All cables are fitted under cover will be affected in cutting area.

Описание   блок TPV-600DII TPV-600AII
ПЕРЕМЕЩЕНИЯ По оси X mm 600 600
По оси Y mm 420 420
По оси Z mm 400 530
Расстояние поверхность стола - торец шпинделя mm 150~550 150~680
СТОЛ Размер стола mm 700×450
Макс.нагрузка kgs 250
Т-пазы (размер х количество х шаг) mm 14x100x4
ШПИНДЕЛЬ Обороты шпинделя rpm 8000
Макс. Постукивание скоростной rpm 3000
Конус шпинделя - 7/24 BT-40
коробка передач - прямой привод
ПОДАЧИ Ускоренные подачи(G00) m/min 48/48/48
Рабочие подачи(G01) mm/min 10000
Инструментальный магазин хвостовик инструмента - BT-40
Pull Studs - P40T-1 MAS403-45"
Емкость магазина - 14 24+1
Макс. длина инструмента mm 300 300
Макс. Диаметр инструмента mm 100 80
Вес инструмента kgs 3 4
Время смены инструмент-инструмент sec 1.8 1.7
стружка-стружка sec 2.4 2.4
магазин инструментов -  безрукая-манипулятором рукой-манипулятором
ДВИГАТЕЛИ Серво-привода осей X (Mitsubishi/FANUC) KW 1.5/1.2
Серво-привода осей Y (Mitsubishi/FANUC) KW 1.5/1.2
Серво-привода осей Z (Mitsubishi/FANUC) KW 3.0/3.0
ШПИНДЕЛЬ KW 7.5/5.5

■ Все технические характеристики, размеры и конструктивные характеристики могут быть изменены без предварительного уведомления.

TPV-600II Series
Standard Option
Spindle air blow device Magazine with Servo Indexing (TPV-600E)
Magazine with Servo Indexing (TPV-600D) Coolant through spindle (TPV-600D/600A)
Work light (PL Light) High speed spindle Upgrade to 10K/12K, 15K(TPV-600D/600A)
Coolant system and coolant tank Spindle Power Upgrade 7.5/5.5 kw (TPV-600E), 11/7.5 kw (TPV-600D/600A)
Leveling bolts and pads SK-40 Magazine & Spindle
Double-cabinet-type electrical cabinet (with heat exchanger) HSK-63 Magazine & Spindle (TPV-600A)
Chip auger Extra Low Lnertia Spindle Motor (Mitsubishi/Rigid Tapping 4000rpm)
Automatic lubrication system ATLM with Breakage Detection
Tool kit and tools Automatic Door
Dual-color LED alarm light Transformer/Voltage Stabilizer
TFT LCD monitor Workpiece Air Blow System
Spindle oil chiller (Spindle speed over 10,000 rpm) Oil Mist System
Enclosure Chip Flushing System (TPV-600A) 4th or 5th Axis
  Thermal compensation system
  Scraper or Chain type Chip Conveyor
  Mist Collector
  Enclosure Chip Flushing System (TPV-600E/600D)

■ Standard and optional equipments listed as above are for reference only.
The correct information is dependent on customer's order.

Top