Products
Dependability through comprehensive manufacturing capabilities
- Home
- Products
- Tapping Center
- BT-40 Series
- TPV-700II
BT-40 Series TPV-700II
Model Number: TPV-700II
X Axis Travel: 700 mm
Y Axis Travel: 420 mm
Z Axis Travel: 400/530 mm
Spindle Taper: BT-40
- Description
- Specifications
- Accessories
OPTIMAL STRUCTURE DESIGN！GUARANTEED RIGIDITY AND STABILIT！
The compact CNC machining center, designed and manufactured by TMT, is your best choice in complex work. New generation with high performance and optimal structural design, significant increase drilling and tapping efficiency.
- MEEHANITE high quality casting iron assures permanent rigidity and accuracy.
- The three axes slideways are mounted with precision linear ways thar ensure high smoothness of traveling. Suitable for high speed machining demand.
- This series equipped with high speed traverse on the three axes to significantly increase drilling and tapping efficiency.
- Servo motor directly drives ballscrew, featuring high positioning accuracy without backlash problem.
DIRECT DRIVE SPINDLE
Direct drive spindle, without noise, vibration and backlash.
COLUMN BASE INCREASED
With bagger span offer higher rigidity and cutting stability.
Y AXIS COVER GUARD
Full enclosure design of Y axis to avoid the chips accumulation.
LINEAR WAYS ON 3 AXES
The X, Y, Z axis slideways are mounted with precision linear ways, fitted with great span between ways, showing maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy.
HIGH EFFICIENCY CHIP FLUSHING SYSTEM AND EXTRA WIDE SPAN
- Back-flow base design of chip removal angle provides ultimate chip removing capabilities.
- With extra wide span, superior stability.
MOTOR OF Y AXIS
Y axis motor is mounted in front of machine to reduce the length of Y axis ballscrew, and heat difference.
ENCLOSED OF CABLE AND PIPES
All cables are fitted under cover will be affected in cutting area.
|
MODEL
|
Unit
|
TPV-700D II
|
TPV-700A II
|
||
|---|---|---|---|---|---|
|
TRAVEL
|
X-Travel
|
mm
|
700
|
700
|
|
|
Y-Travel
|
mm
|
420
|
420
|
||
|
Z-Travel
|
mm
|
400
|
530
|
||
|
Table to Spindle Nose
|
mm
|
150～550
|
150～680
|
||
|
TABLE
|
Table Size
|
mm
|
800×450
|
||
|
Max. Load
|
kgs
|
250
|
|||
|
T Slot
|
mm
|
14x100x4
|
|||
|
SPINDLE
|
Spindle Speed
|
rpm
|
8000
|
||
|
Max. Tapping Speed
|
rpm
|
3000
|
|||
|
Spindle Taper
|
-
|
7/24 BT-40
|
|||
|
Transmission
|
-
|
Direct Type
|
|||
|
FEEDRATE
|
Rapid Traverse(G00)
|
m/min
|
48/48/48
|
||
|
Cutting Feedrate(G01)
|
mm/min
|
10000
|
|||
|
MAGAZINE
|
Tool Shank
|
-
|
BT-40
|
||
|
Pull Studs
|
-
|
P40T-1 MAS403-45"
|
|||
|
Tool Capacity
|
-
|
14
|
24+1
|
||
|
Max. Tool Length
|
mm
|
300
|
300
|
||
|
Max. Tool Diameter
|
mm
|
100
|
80
|
||
|
Tool Weight
|
kgs
|
3
|
4
|
||
|
Tool Change Time
|
Tool to tool
|
sec
|
1.8
|
1.7
|
|
|
Chip to chip
|
sec
|
2.4
|
2.4
|
||
|
Magazine Type
|
-
|
Armless
|
Arm
|
||
|
MOTOR
|
X-Axis Servo Motor(Mitsubishi/FANUC)
|
KW
|
1.5/1.2
|
||
|
Y-Axis Servo Motor(Mitsubishi/FANUC)
|
KW
|
1.5/1.2
|
|||
|
Z-Axis Servo Motor(Mitsubishi/FANUC)
|
KW
|
3.0/3.0
|
|||
|
Spindle Motor
|
KW
|
7.5/5.5
|
|||
■ All specifications, dimensions and design characteristics are subject to change without prior notice.
| TPV-700II Series | |
|---|---|
| Standard | Option |
| Spindle air blow device | Magazine with Servo Indexing (TPV-700E) |
| Magazine with Servo Indexing (TPV-700D) | Coolant through spindle (TPV-700D/700A) |
| Work light (PL Light) | High speed spindle Upgrade to 10K/12K, 15K(TPV-700D/700A) |
| Coolant system and coolant tank | Spindle Power Upgrade 7.5/5.5 kw (TPV-700E), 11/7.5 kw (TPV-700D/700A) |
| Leveling bolts and pads | SK-40 Magazine & Spindle |
| Double-cabinet-type electrical cabinet (with heat exchanger) | HSK-63 Magazine & Spindle (TPV-700A) |
| Chip auger | Extra Low Lnertia Spindle Motor (Mitsubishi/Rigid Tapping 4000rpm) |
| Automatic lubrication system | ATLM with Breakage Detection |
| Tool kit and tools | Automatic Door |
| Dual-color LED alarm light | Transformer/Voltage Stabilizer |
| TFT LCD monitor | Workpiece Air Blow System |
| Spindle oil chiller (Spindle speed over 10,000 rpm) | Oil Mist System |
| Enclosure Chip Flushing System (TPV-700A) | 4th or 5th Axis |
| Thermal compensation system | |
| Scraper or Chain type Chip Conveyor | |
| Mist Collector | |
| Enclosure Chip Flushing System (TPV-700E/700D) | |
■ Standard and optional equipments listed as above are for reference only.
The correct information is dependent on customer's order.