Products

Dependability through comprehensive manufacturing capabilities

TTL Series TTL-MY Series

Model Number: TTL-MY Series

Chuck size:6"/8"/10"
Bar capacity:Ø45/Ø52/Ø65mm
Max. working length:420/450mm
Max. turning diameter:Ø300mm
Spindle Nose:A2-5/A2-6

  • Description
  • Specifications
  • Accessories

Extreme Turning for the New Era!

TTL-Series offers high productivity and high accuracy performance through exceptional cutting capability and parts finish. The TTL-Series is your best choice for ultra-performance turning center. With Y axis function, TTL-Series can reach your needs for higher level and various cutting.

High Efficiency / High Accuracy

  • The one piece cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
  • The 30゚ slant bed design has low center of gravity for easier swarf management and better ergonomic design.  The TTL-series also offers optional rear discharge chip conveyor.
  • Servo motors are directly coupled to ballscrew with high pretension to minimize backlash and thermal distortion and improve machining accuracy.
  • TTL-Series incorporates high quality linear guide system offering better accuracy, higher speed and lower friction than boxed way.  The TTL-Series can achieve maximum 30m/min axial rapid feed in both X and Z axis.
ttl

Head Stock

The spindle has labyrinths to prevents moisture and dust. The spindle is supported by NN double-row bearings combined with thrust ball bearing.

ttl

Hydraulic Turret (STD)/ Servo Turret (OPT)

Low noise and high torque DANFOSS hydraulic system is used to enhance the turret clamping force as well as station change time.
High speed servo driven turret changes tool position within 0.3 seconds with high precision and speed.

ttl

Direct Drive Spindle

Direct coupled ballscrew transfers energy without waste.

ttl

BMT Power Turret (TTL-20M/MY Series)

The highly rigid BMT turret has large torque output and stronger tool locking mechanism to handle heavier cutting conditions while improving tool interference. The BMT turret is ideal for heavy turning and milling applications.

ttl

True Y-Axis (TTL-20MY Series)

The true linear Y-axis can make operation more easily. Compare to fake Y-axis, it can provide great straightness, and also ensure excellent positioning accuracy. To satisfy high precision cutting needs.

ttl

Manual Tailstock

Highly rigid tailstock structure and hydraulic tailstock center reduces cutting vibration.
The tailstock can be easily positioned through manual connection with turret.

ttl

Manual/ Auto Tool Presetter(OPT)

The tool presetter shortens tool set up time and can easily measure tool wear to ensure machining accuracy.

ttl

Load Monitor Function(OPT)

FANUC control system: Extra load monitor function to control tooling working to axial loading value, which can notice tool consumption in advance and reduce loss rate of production efficiently.

ttl

Rear Type Chip Conveyor(OPT)

The optional rear discharge chip conveyor reduces valuable shop floor space and allows you to centralize your chip removal system.

ttl

Upright Control Panel

The agronomical control panel can be swiveled 90˚ for easier operator access.

ttl

Front Discharge Coolant Tank

Coolant tank can be removed in the front simple access to clean and maintain.

Ergonomically Designed Coolant

Ergonomically designed for easy machine set up and parts loading and unloading.

Tool Cabinet

Tool cabinet under the control panel offers extra storage space for operator to use for storing tools.

Description   Unit TTL-15 TTL-20 TTL-20
  Headstock Type   ALMY ALMY BLMY
Controller - 0i-T 0i-T 0i-T
CAPACITY Swing over bed mm φ670 φ670 φ670
Swing over saddle mm φ380 φ380 φ380
Max. turning diameter mm φ300 φ300 φ300
Max. working length mm 450 450 420
Distance between centers mm 570 570 560
Bar capacity mm φ45 φ52 φ65
Chuck size inch 6" 8" 10"
STROKE X-axis stroke mm 150+30 150+30 150+30
Y-axis stroke mm 100(±50) 100(±50) 100(±50)
Z-axis stroke mm 580(22.62) 580 550
FEEDRATE Axial rapid feedrate m/min X:30, Z:30,Y:10 X:30, Z:30, Y:10 X:30, Z:30,Y:10
Cutting feedrate (X/Z) mm/min 10000 10000 10000
SPINDLE Spindle speed rpm 6000 4200 3500
Spindle nose - A2-5 A2-6 A2-6
Spindle bore diameter mm φ55 φ66 φ79
TURRET Turret type and storage capacity - BMT-55/V12 BMT-55/V12 BMT-55/V12
Square tool dimension mm 25x25 25x25 25x25
Boring tool dimension mm φ40 φ40 φ40
M-axis tool speed rpm 4000 4000 4000
M-axis tool motor output (cont/15 min) KW(HP) 2.2/3.7(3/5) 2.2/3.7 (3/5) 2.2/3.7(3/5)
MOTOR Spindle motor output (cont./30 min.) KW(HP) 7.5/11(10/14.7) 7.5/11(10/14.7) 11/15 (14.7/20)
Axial servo motor output KW(HP) X:3.0,Z:3.0,Y:3.0
(X:4.0,Z:4.0,Z:4.0)
X:3.0, Z:3.0,Y:3.0
(X:4.0, Z:4.0, Y:4.0)
X:3.0, Z:3.0, Y:3.0
(X:4.0, Z:4.0, Y:4.0)

■ All specifications, dimensions and design characteristics are subject to change without prior notice.

TTL Series
Standard Option
FANUC 0i-T controller Collet Chuck
Hollow Hydraulic 3-jaw Chuck 6"/8"/10" Hydraulic Turret V12 (TTL Series)
Hydraulic Turret V10 (TTL Series) Servo Turret V10/V12 (TTL Series)
BMT-55 Power Turret (TTL-M/MY Series) Programmable Tailstock  (TTL-L/LM/LMY Series)
Foot Switch Control for Chuck Parts Catcher
Manual Tailstock  (TTL-L/LM/LMY Series) Product Conveyor
Coolant System Rear Type Chip Conveyor & Cart
Automatic Lubrication System Auto Door
3-color Warning Lamp Manual/Auto Tool Presetter
Working Lamp Front Air Blast
Tool Box with Tools Oil Mist Collector
Chip Conveyor & Chip Cart Oil Skimmer
Operation/Maintenance Manual High Pressure Cutting Coolant Motor
Heat Exchanger Barfeeder Interface
Manual Guide 0i Bar Feeder
Auto Power Off (M30) Air Conditioner
Dynamic Graph Simulation Transformer/ Voltage Stabilizer
Rigid Tapping  
RS-232 Interface  
Memory Card Interface(PCMCIA)  
Ethernet  
USB Interface  

■ Standard and optional equipments listed as above are for reference only.
 The correct information is dependent on customer's order.

Top